At California Dowel & Turnings, Inc., we strive to supply the furniture and cabinet industry with the highest quality and competively priced wood products. |
|
1/4 Dowel Pins x 1
|
|
The 1/4" by 1" dowel pin is used with wood components of smaller sizes. The fractional hole should be drilled using a standard 1/4 inch bit. The two dowel holes should be a fraction deeper than 1" to assure a gapless joint. Questions? Please call.
|
|
Select the Number Per Pack:
| |
Select the Number of Packs:
| QTY of
Pins
Per Pack |
Cost
Per Pin
|
Cost
Per Pack
| | 100 | .0138 | 1.38 | | 500 | .0132 | 6.60 | | 1,000 | .0125 | 12.50 | | 2,500 | .0104 | 26.00 | | 5,000 | .0088 | 44.00 | | 10,000 | .0075 | 75.00 | | 25,000 | .0065 | 162.50 | | 50,000 | .0060 | 300.00 | | 100,000 | .0057 | 565.00 | | 250,000 | .0053 | 1,312.50 |
|  Secure Online Transactions |
|
1/4 Dowel Pins x 1 | + all sizes, types - Caldowel - Quality Wood Products |
Technical Details | | | | Additional Sizes Available | | | | - Standard
- Fractional
- Inches
- Diameter 1/4
- Length 1
- Diameter Decimal 2500
- Tolerance Minus -.004
- Tolerance Plus +.006
- Kiln-Dried
- Hardwood
- Birch
- Chamfered
- Dowel Pin
- Fluted
- Multi-Grooved
- For Interior Application
| | | | 1/4x1inchMGPG
1/4x1inchSG
1/4x1-1/4inchMG
1/4x1inchSG
1/4x1-1/2inchMG
1/4x1-1/2inchSG
1/4x1-3/4inchMG
1/4x1-3/4inchSG
1/4x2inchMG
1/4x2inchSG
1/4x2-1/4MG
1/4x2-1/4inchSG
1/4x2-1/2inchMG
1/4x2-1/4inchSG
1/4x3-1/2inchMG
1/4x3-1/2inchSG
| | 
| |
|
|
|